If you want the Wi-Fi radio settings of a venue to be different from the default radio settings, you can override them for a particular venue.
NOTE
The 2.4 GHz and 5 GHz radio settings, although very similar, must be configured separately.
Complete the following steps to customize the radio settings of a venue.
-
From the navigation pane, click
Venues.
-
Click the name of the venue for which you want to customize the radio settings.
The venue overview page is displayed.
-
In the
Venue Settings section, click
View after the
WiFi Radio Settings.
The
Custom Radio Settings page is displayed.
-
Click
Edit.
The Radio Settings dialog box for the selected venue appears.
-
Configure the following settings for both the 2.4 GHz and 5 GHz radios:
- Channel Selection Method: Select either
Background Scanning or
ChannelFly.
- Run background scan every [ ] seconds: If you selected
Background Scanning, interval at which Ruckus Cloud will run the scan. The interval ranges from 1 through 65535 seconds. The default is 20 seconds.
- Bandwidth: Select
Auto,
20 MHz, or
40 MHz channel width for the 2.4 GHz radio, or
Auto,
20,
40,
80, or
160 MHz channel width for the 5 GHz radio.
- Tx Power Adjustment: Manually set the transmit power on all 2.4 GHz or 5 GHz radios. The default is
Max.
- Channel Selection: A blue icon above the channel number indicates that the channel is enabled for the radio. If there are channels that you do not want the radio to use, disable them by clicking their respective icons. When a channel is disabled, its blue icon changes to gray.
NOTE
For the 5 GHz radio, you must configure a different set of channels for indoor APs and outdoor APs.
-
Click
Save, and then click
Close.
