If you want the LAN port settings of a specific AP model to be different from the default settings of the venue, you can override them for a specific AP.
Follow these steps to customize the AP LAN Port settings of an AP.
NOTE
Ensure that any AP to be customized is operational before performing this task.
-
From the navigation pane, click Networking Devices and select the
WiFi tab.
-
Click the name of the AP for which you want to customize the AP LAN port settings.
The AP overview page is displayed.
-
In the
Settings section, click
Edit after the
AP LAN Port Settings.
The
AP LAN Port Settings page is displayed.
-
Click the LAN port to be configured and configure the following fields:
- Select the
Enable Port check-box.
- Choose the
Port Type. The options are
Trunk, Access, or
General.
- Enter the
VLAN untag ID. For a trunk port, the default is 1.
- Enter the
VLAN members. Enter a single VLAN ID or a VLAN ID range (or a combination of both). The valid VLAN ID range is 1 through 4094.
-
Click
Save, and then click
Close.
