If you want the LAN port settings of a specific AP model to be different from the default settings, you can override them for a specific venue.
Complete the following steps to customize the AP LAN Port settings of a venue.
From the navigation pane, click
Venues.
Click the name of the venue for which you want to customize the AP LAN port settings.
The venue overview page is displayed.
In the
Venue Settings section, click
Edit after the
AP LAN Port Settings.
The
AP LAN Port Settings page is displayed.
Select the
AP Model.
Depending on the AP model, up to five LAN ports can be configured. Named tabs (for example, LAN 1 and LAN 2) are displayed for each LAN port that can be configured.
Click the LAN port to be configured and complete the configuration:
Select the
Enable Port check box.
Choose the
Port Type. The options are
Trunk,
Access, or
General.
Enter the
VLAN untag ID. For a trunk port, the default is 1.
Enter the
VLAN members. Enter a single VLAN ID or a VLAN ID range (or a combination of both). The valid VLAN ID range is 1 through 4094.
