Plots

You can plot the relevant LTE KPIs as line graphs.

Follow these steps to display the plot.
  1. Form the drop down, select the time period for which you need to generate the plot. The time period can be for the last month, last 7 days, last 24 hours or a custom range.
    Note: If you select a custom range, specify the start date and end date.
  2. Select the venue for which you want to display the plot. You can select All Venues or select the preferred venue from the list.
  3. Select the AP for which you want to display the plot. You have the option to select all APs or choose a preferred AP from the drop down.
  4. Click the Manage Report Components link to select the components which you want to display in the list. The dialog box displays all the available components in the left pane. You can choose to add all of them in the report by moving them to the right page in the dialog box, by clicking the ">>" button. You can also select particular components by selecting them and clicking the ">" button.
  5. Click Apply to load the graph.
The line graph displays the following components based on your selection in the Manage Report Components dialog box.
  • The Radio Resource Control (RRC) connection establishment successes number in percentage, along the Y axis, against the date and time range displayed in the X axis.
  • The Uplink and downlink traffic volume is displayed in Gigabits along the Y axis, against the date and time range displayed in the X axis.
  • Handover attempts, handover success, and rate and success rate is displayed as percentage in the Y axis against date and time in the X axis. Success in plotted in green color and attempt is plotted in orange color.
  • Availability fo the Spectrum Allocation Server (SAS) is displayed as percentage along the Y axis against date and time range in the X axis.
  • Availability of GPS services is displayed as percentage along the Y axis against date and time range in the X axis.
  • The throughput is represented as the average down link throughput (Mbps) and average uplink throughput (Mbps) along the Y axis, against date and time range in the X axis. The number of active UEs plot are available to compare with throughput, on the same plot
  • Cell availability is displayed as percentage availability along the Y axis, against date and time range along the X axis.
  • Phase locked is represented as percentage long the Y axis, against date and time range along the X axis.
    Note: A phase-locked loop (PLL) is in a locked state when the phase error signal produced by the phase detector settles to a constant value.
  • The Frequency Synchronization percentage displayed along the Y axis, against the date and time range in X axis.

Choose the Custom Combination option to represent any two components listed previously in a single line graph. To select the components, select the respective check box and click Save. Click Export to file and choose to export the Custom combination graph as a CSV or PDF file.