Customizing Cellular Radio Settings

Note: Currently, this configuration is supported only on M510 Model.
Complete the following steps to customize the cellular radio settings.
  1. From the navigation pane, click Venues.
  2. Click the name of the venue for which you want to customize the cellular radio settings.
    The venue overview page is displayed.
  3. In the Wi-Fi Settings section, click Edit after the Cellular Radio Settings.
    The Cellular Radio Settings dialog box is displayed.
  4. By default, both 1 Primary SIM and 2 Secondary SIM are set to ON. Use the toggle button to set the SIMs to ON or OFF.

    You must enable at least one SIM slot (Primary or Secondary).

  5. Configure the following settings for both Primary SIM and Secondary SIM:
    • APN: Enter the APN name.
    • 3G/4G (LTE) Selection: By default, Auto is configured. You can select either 4G (LTE) only, or 3G only, or Auto.
    • Data Roaming: By deafult, data roaming is set to ON. To disable data roaming, toggel the Data Roaming to OFF.
  6. Select the WAN Connection.
    • Ethernet (Primary) with cellular failover (Default)
    • Cellular (Primary) with Ethernet failover
    • Ethernet Only
    • Cellular Only
  7. Set the Primary WAN Recovery Timer. The default value is 60 seconds. The valid value is from 10 through 300 seconds.
  8. Click Save.