You can import a floor plan to a venue to help you visualize the actual physical locations of your managed networking devices.
To import a floor plan to your Ruckus Cloud account, you will need a floor plan image in .GIF, .JPG, or .PNG format. The floor plan image must conform to the following parameters:
- Monochrome or grayscale
- No larger than 1 MB in size
- No larger than 10 inches (720 pixels) per side
Before you begin this procedure, save the floor plan image to a location that you can access from the computer that you are using to access the Ruckus Cloud web interface.
Complete the following steps to import a floor plan.
-
From the navigation pane, click
Venues.
-
On the
Venues page, locate the venue for which you want to import a floor plan.
-
Click the
Overview tab.
-
Click
Add Floor Planin the upper-right corner.
The
Add New Floor Plan page appears.
-
Complete the following fields to add a new floor in this venue:
-
Floor Plan Name: Enter a name that you want to assign to the floor. For example, you can enter "First Floor" or "Sales".
-
Floor Number: Enter or select the floor or level number. "0" is the ground floor, "1" is the first floor, "2" is the second floor, and so on.
-
Floor Plan Image: To upload a floor plan image for this floor, click
Upload. When the
Open dialog box displays, browse to the location where you saved the floor plan image, select the image, and click
Open.
-
Click
Save.
The imported floor plan appears on the venue
Overview tab. A list of APs and switches that have not been placed on any existing floor plans can be found under
Unplaced Devices.