Adding Macro EARFCN

Follow these steps to add Macro EARFCN ( E-UTRA Absolute Radio Frequency Channel Number).

  1. On the Dashboard, click Venues.
    The Venues page appears displaying the existing venues, if any.
  2. Select the venue to configure advance settings.
    The Venue Overview page appears.
  3. Locate LTE Settings under Venue Settings and click Edit.
    The LTE Settings dialog box appears.
    Venue LTE Settings
  4. In the Macro EARFCN section, click Add Macro EARFCN.
    You can add up to 8 Macro EARFCNs. After adding 8 Macro EARFCN, the add option is disabled.
    The Add Macro EARFCN dialog box appears.
    Adding Macro EARFCN
  5. Enter the following parameters.
      • Carrier: Enter a unique and a valid number. The range from 0 through 262143.
      • Cell Individual Offset: Enter a valid number. The range from -1 to -24 or from 0 through 20.
      • EARFCN Bandwidth: Enter one of these: BW6, BW15, BW25, BW50, BW75, or BW100
  6. Click OK.
    Note: Changing Macro EARFCN will require a reboot of LTE APs in venue.
  7. Click Save.
    The Macro EARFCN configuration is saved and the LTEs APs in the venue are rebooted.
    Saving and Rebooting LTE APs