Services Settings

Complete the following steps to customize the Sylog Server and Location Server (vSPoT) services of a venue.
  1. From the navigation pane, click Venues.
  2. Select a venue to go to the Wi-Fi Settings page.
  3. Click Settings on upper-right corner and then select Wi-Fi Settings from the drop-down.
  4. Select the Services tab.
    The Services page appears. By default, the Syslog Server sub-tab is selected.
    Syslog Server
  5. To customize the Syslog Server you must first turn the Enable Server switch to ON.
  6. Configure the following fields:
    • Enter the IP address of the external syslog server in the Primary Server Address field. This is a required field.
    • Enter the port number in the Port field. The default is 514. This is a required field.
    • Choose a protocol from the Protocol drop-down. Supported protocols are TCP and UDP.
    • (Optional) Configure the Secondary Server Address.
    • Select the event facility from the Event Facility drop-down. The options are Keep Original (default), 1, 2, 3, 4, 5, 6, and 7.
    • Select a send logs options from the Send Logs drop-down. The options are: General Logs, Client Flow, and All Logs
  7. Click Save Sevices, and then click Close.

  1. After Step 4, select the Location Server (vSPoT) sub-tab.
    The Services page appears. By default, the Syslog Server sub-tab is selected.
    Location Server
  2. Set the Location Server (vSPoT) to ON. By default, Location Server (vSPoT) switch is set to OFF.
  3. Click Add Server to add a Location Server.
    The Add Server dialog box appears.
    Add Server
  4. Complete the followingc and then click Add.
    • Server Description: Enter the name of the server (up to 32 alphanumeric characters).
    • Server Address: Enter a valid IP address or URL (up to 252 characters).
    • Port: Enter the port number. The valid range is from 1 through 65535. The default value is 8883.
    • Password: Enter the password for the location server. The password must be a minimum of 8 characters and up to 63 characters in length.
      Note: The password is automatically generated in SPoT ™ when you create the venue configuration.
  5. Click Save Sevices, and then click Close.