From the RUCKUS One web interface, you can add or edit VLANs.

1. On the navigation bar, click Wired and click Configuration Profiles under Wired Network Profiles.

   The Wired Networks page is displayed. By default, the Configuration Profiles tab is selected.

2. Click Add Regular Profile or select an existing profile and click Edit.
3. In the General Properties, enter the profile name and description and the click Next.
4. Click Add VLAN.
5. In the VLANs page, complete the following.

   

   • VLAN ID: The VLAN ID.
   • VLAN Name: The VLAN name.
   • IPv4 DHCP Snooping: Toggle the switch to ON. By default, the switch is turned OFF.
   • ARP Inspection: Toggle the switch to ON. By default, the switch is turned OFF.
   • IGMP Snooping: Select Active, Passive, or None.
   • Multicast Version: Select a multicast version.
   • Spanning tree Protocol: Select spanning tree protocol: RSTP, STP or None.
6. Click Save to return to the Configuration Profile page.
7. (Optional) Click Default VLAN Settings to add configure the default VLAN.
8. Enter the default VLAN in the VLAN ID field.
9. Select the spanning tree protocol as RSTP, STP or None.
10. Click Save to return to the Switch Configuration Profile dialog box.