The ICX switches support up to 12 units per stack. All the different SKUs of the same switch family can stack with each other except for ICX7150-C08P/PT. ICX 7150 Module 3, 1G interface cannot be used as stacking port. You can add a standalone switch to a stack member and convert two or more standalone switches to a stack if the switches are of the same model, in the venue, and are operational. You must procure the 10G licenses for stacking.

1. On the Dashboard, click Networking Devices and select the Switch tab.
2. Click Add Stack in the upper-right corner.
   The Create Stack dialog box is displayed. Alternatively, from Venue page, select a venue, select Networking Devices , select Switch, and then click Add Stack.

   

3. Complete the following fields to add a stack:
   • Venue: Select the venue to which you want to deploy this switch.
   • Stack Name: Enter the name of the stack.
   • Description: (Optional) Add a brief description of the switch.
   • Stack Members: Select the switches that you want to add to the stack.
   • Serial Number: Enter the 11-digit valid serial numbers of the switches.
4. Click Add another member to add more switches to the stack.
5. Click Create to add a stack.

   The Create button is grayed out if valid switch serials are not entered.