Supported Software and Hardware
RUCKUS One offers support for a select list of RUCKUS AP models, ICX switch models, and RUCKUS Edge devices. Before adding an AP, switch, or RUCKUS Edge device to RUCKUS One, make sure that it is a supported model and running the required firmware version.
Supported ICX Firmware and Switch Models
Supported ICX versions: RUCKUS FastIron 09.0.10f for supported ICX 7000 series switches and FastIron 10.0.0 and later for ICX 8200 series switches.
If an ICX 7000 series switch is not running the minimum required version, you can download FastIron 09.0.10f (the latest version supported by RUCKUS One) from the following link and complete the switch image update from the switch CLI:
The following is a list of supported RUCKUS ICX switch models:
- ICX 7150
- ICX 7550
- ICX 7650
- ICX 7850
- ICX 8200
For the list of supported ICX switches, refer to: https://www.ruckusnetworks.com/ruckus-one-supported-network-devices.
Supported AP Firmware and AP Models
To determine whether your RUCKUS AP models can connect to RUCKUS One, refer to: https://www.ruckusnetworks.com/ruckus-one-supported-network-devices.
Supported RUCKUS Edge Firmware and RUCKUS Edge Models
RUCKUS One supports the RUCKUS Edge virtual platform and hardware appliance platform.
RUCKUS Edge devices are supported on RUCKUS Edge firmware version 2.1.0.971. As new firmware versions are released, they will be made available in the tab.