From the Wi-Fi page, you can get an overview of the Wi-Fi clients.

1. From the navigation bar, click Clients to expand the menu.
2. Under Wireless, click Wireless Clients List.
3. Click a client name to go to the Overview page.
   The Overview page provides details information about the Wi-Fi client.

   

   The Overview tab consists of the following components:

   • Overview
   • Client details
   • Top 10 Applications by traffic volume
   • Operational data
   • Connection
   • Traffic by usage
   • Traffic by band
   In the Overview tab, you can choose to display information based on the following time duration.

   • Last 24 hours
   • Last 7 days
   • Last 30 days
   The Overview section displays the following information.

   Table 1. Overview

   Properties	Description
   Current Status	Current Connection Status
   APs Connected	Number of APs that are connected
   Avg. Rate	Average rate in Bytes
   User Traffic	User traffic in MB
   Total Connected Time	Total connected time in hours and minutes
   Applications	Number of applications being used
   Avg. Session Length	Average session length in minutes and seconds
   Sessions	Number of sessions
   2.4 GHz, 5 GHz, and 6 GHz	Utilization of 2.4-GHz, 5-GHz, and 6-GHz radios in MB

   The Client Details section displays information about the wireless client's network properties. The following table lists the client's current connection details:

   Table 2. Client Details

   Properties	Description
   MAC Address	MAC address of the wireless client
   IP Address	IP address assigned to the wireless client
   OS	Operating System icon and name
   Host Name	Product name
   User Name	User name used to associate with wireless client with the managed AP

   The Operational Data (Current) section displays information about the wireless client's operational data. The following table lists the operational data details for current connected clients ( this information is not available for disconnected clients):

   Table 3. Operational Data (Current)

   Properties	Description
   RF Channel	Radio Frequency (RF) channel number
   Traffic From Client	Number of bytes received during this current session
   Packets From Client	Number of packets in total, received during this current session
   Traffic To Client	Number of bytes sent during this current session
   Packets To Client	Number of packets in total, sent during this current session
   Frames Dropped	Number of frames dropped during this current session
   SNR	The signal-to-noise ratio, expressed in decibels (dB). The signal power indicator adjacent to the value indicates signal strength; hover over the SNR value to check the signal strength. Higher value indicates more power.
   RSSI	The received signal strength indicator, expressed in dBm. The value may be expressed in three colors - green, orange, or red. Green represents good signal strength, orange represents moderate signal strength, and red represents poor signal strength.
   Noise Floor	An estimate of the radio's noise floor power of an AP, expressed in dBm.

   The Connection section displays the information about the wireless client's connection. The following table lists the client's current connection details:

   Table 4. Connection

   Properties	Description
   AP	Name of the AP with which the wireless client is associated
   Venue	Venue name where the client is located
   Wireles Network	Network name
   SSID	SSID on the managed AP to which the wireless client is associated
   VLAN ID	ID number of the VLAN
   BSSID	BSSID on the managed AP to which the wireless client is associated