Migration of ZoneDirector AP Radio and Channel Configuration to RUCKUS One
When a ZoneDirector-managed AP is migrated to RUCKUS One, the related AP radio and channel configuration is migrated.
Migration Overview
You can view the migrated radio and channel configuration settings from the Venue and menus.
Refer to the following table to determine the scope of radio and channel configuration migration from ZoneDirector to RUCKUS One:
Menu | Radio | Selected ZoneDirector Settings | After Migration to RUCKUS One | |
---|---|---|---|---|
Venue | 2.4 GHz and 5 GHz | Background scanning | Background scanning | |
ChannelFly | ChannelFly | |||
AP | 2.4 GHz and 5 GHz | Background scanning | Background scanning | |
ChannelFly | ChannelFly | |||
Channelization (MHz) (Bandwidth in RUCKUS One) | Auto | Auto | ||
20 | 20 | |||
40 | 40 | |||
80 | 80 | |||
80+80 | 80+80 is not supported in RUCKUS One, so it is migrated to Auto. | |||
160 | 160 | |||
Channel (Channel selection method in RUCKUS One) | Auto | Auto is migrated to RUCKUS One as the Channel selection method with Background Scanning or ChannelFly selected as per the selection made in ZoneDirector. | ||
Manual | Manual is migrated to RUCKUS One as the Channel selection method with the Manual channel selection option selected. The selected channels appear in Channel selection. | |||
Transmission power (Transmit power adjustment in RUCKUS One) | Full | Full | ||
-1dB | -1dB | |||
-2dB | -2dB | |||
3dB(1/2) | 3dB(1/2) | |||
-4dB | -4dB | |||
-5dB | -5dB | |||
-6dB(1/4) | -6dB(1/4) | |||
-7dB | -7dB | |||
-8dB | -8dB | |||
9dB(1/8) | 9dB(1/8) | |||
-10dB | -10dB | |||
Min | Min | |||
Auto | Auto | |||
Channel Range (Channel selection in RUCKUS One) | Channels enabled/disabled in ZoneDirector are retained in RUCKUS One. In a scenario where the channels enabled in ZoneDirector are not supported in RUCKUS One, then those channels will not be migrated to RUCKUS One. | |||
5.8 GHz | Channels enabled in ZoneDirector are retained in RUCKUS One. | |||
AP Group | 2.4 GHz and 5 GHz | If the radio or channel settings of the ZoneDirector AP are inherited from the customized AP group or default AP group, then these settings are cascaded in to RUCKUS One AP after migration. |
Considerations
Only when the following options are enabled or configured in ZoneDirector, will they be migrated to RUCKUS One.
- Allow indoor channels (allows Outdoor APs to use channels regulated as indoor use only) option ( ) from ZoneDirector will be migrated as the Use same channels for indoor and outdoor APs option in RUCKUS One.
- Enable 5.8 GHz channels option configured in ZoneDirector will be migrated to RUCKUS One.