You can configure the directed multicast on an access point (AP).

1. On the navigation bar, click Wi-Fi > Access Points > Access Point List.
2. Click the name of the AP on which you want to configure directed multicast.
3. On the upper-right corner, click Configure.
   The AP configuration page is displayed.
4. Select the Networoking tab.
5. From the left mini navigation bar, click the Directed Multicast tab.

   

6. Click Customize.
7. In the Multicast Traffic from section, toggle to the following to enable directed multicast.
   • Wired Client
   • Wireless Client
   • Network
8. Click Apply Directed Multicast.